|
HOW TO DO FURNITURE REPAIRS
-
Apply
fresh glue to both parts to be welded.
-
Wipe
off excess glue.
-
Apply
ample pressure to close the joint, and pull
trigger switch -moving the tuning lever to maximum
heat.
-
Allow
joint to cool a little before removing the clamp.
NOTES ON FINISHED PARTS: In
all cases where it is desirable to retain the present
finish, the repaired joint must be set as fast as
possible. Do
not over heat the glue, just enough to set it. To
patch a veneer, apply glue under the veneer that has
come loose. Wipe
away the excess glue with a damp cloth.
Place a small piece of quarter ply over the
spot to be repaired and weld. Put a drop of water in a dent.
Cover with quarter ply and apply electronic
heat. Dent
will rise from resulting steam.
|
|
